Iiia Body Armor

Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included

Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included
Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included

Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included    Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included

Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlar included. This model complies with NIJ Standard-0101.06 for Ballistic Resistance of Body Armor. The Corsair M3c vest offers full 3A ballistic protection, including the back, chest and sides of the torso, as well as shoulders, neck, and groin. The vests size is adjusted. The vest "Corsair M3c" is designed for heavy use, even in hot climates: when the waist fasteners are set slightly loose, the vest balances on the wearers torso allowing breathing room between the plate carrier and the wearers skin.

Loose wearing of the vest is not advisable during combat, but having the option prevents the need for removal of the vest to cool down during non-combat. The front and back of the vest have full-size pockets, exterior to the Kevlar 3A Soft Armor, which are hard armor plate ready. Independent of the exterior pockets for hard armor plates, the entire surface of the vest, neck and shoulder pads, and groin pad are fitted with custom-cut 3A Kevlar ballistic armor. The Kevlar armor is bendable and lightweight making it an ideal choice for balancing protection and maneuverability.

The Kevlar armor is enclosed within the water-resistant fabric of the vest making it suitable for all but the wettest of conditions. On the entire surface of the bulletproof vest is outfitted with 25mm belt strapping at an alternating interval of 25mm to comply with the MOLLE (MOLLY) standard, on which items of equipment and ammunition can be attached (pockets and gear). All straps lines MOLLE vest have the same color in the color of the vest. Do not light up in the night and do not stand out in daylight.

What makes 100% draining the terrain. Belt tape is manufactured according to TU U 13.2-31778043-115: 2015 on polyamide yarn, has maximum breaking loads. The vest "Corsair M3c" is a modular system and can completely disassemble. Made of a very robust and high-strength quality fabric (high-strength polyamide fabric "SCC-36, " "TPS-12").

Completion of bulletproof vests "Corsair M3c" can be supplemented with hard armor plates (at an additional cost). The fastening of the left and right axle shafts of the side protection in sides has a double fixation with a textile fastener. Length of side wings adjustable. From the back on the top of the vest is rigidly fixed the evacuation line.

In the side compartments, also and rigid armor plates can be placed. The left and right side elements of the body armor are protected by the MOLLE system from the back, this fastening allows you to adjust the bulletproof vest at the waist. This allows you to wear a vest like in summer on a T-shirt and in winter on a warm volumetric jacket. The bulletproof vest is equipped with a removable neck (collar) protection, which consists of 3 parts. The groin protection element is fastened with belt strips to the MOLLE slings located on the bottom of the chest cover.

The size is M (Medium) 25x30 cm / 9,84x11.81. On the front side of the vest has 6 rows of MOLLE sling lines, for which you can install all necessary pouches, Mags, pockets for documents, a flashlight, walkie-talkie and other ammunition. Kevlar ballistic armor, rated 3A (IIIA) (USA). Every square inch of stitched material is packed with custom fit Kevlar body armor. The vest front, the vest rear, each side of the vest, the detachable shoulders and 3-piece neck collar, and the groin protector.

For additional cost the body armor can be completed. Armor plates in accordance with the standard of Ukraine (DSTU) or the US standard. The hard armor plates are located in the extra pockets of the body armor vest. If you have further questions or other ideas of a trade, feel free to send me messages! If you have any questions, please ask, do not hesitate. Enjoy your shopping, I still have a lot of other products of military and sporting themes. The item "Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included" is in sale since Friday, September 28, 2018. This item is in the category "Collectibles\Militaria\Current Militaria (2001-Now)\Original Items\Personal, Field Gear\Other Current Field Gear". The seller is "global_military" and is located in Kyiv, default. This item can be shipped worldwide.
  • Type: Vest
  • Model: Corsair M3c
  • Threat Level Rating: IIIA
  • Modified Item: No
  • Country/Region of Manufacture: Ukraine
  • Theme: Militaria
  • Original/Reproduction: Original
  • Brand: Temp
  • Featured Refinements: Vest / Plate Carrier
  • Colour: Olive \ gray
  • Time Period Manufactured: 2001-Now

Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included    Full Body Armor Plate Carrier Vest 3A IIIA MOLLE Kevlarr included